VSPEAK MODELL ECU CONVERTER / TELEMETRY for HORNET/BF Turbines/JetItalia
VSPEAK MODELL ECU CONVERTER / TELEMETRY for HORNET/BF Turbines/JetItaliaes/JetItalia
ProJET HORNET ECU controls turbines from behotec, Frankturbine, BF-Turbines, JetItalia, Hammer Engines .
The data that is displayed in the status displays of the TERMINAL can be transmitted by the ECU Converter over the telemetry channel to the radio.
With the VSpeak ECU Converter data from HORNET III and the earlier HORNET II can be transmitted.
The telemetry and ECU connector of the VSpeak ECU Converter are electrically isolated, to avoid repercussions of the turbine control to the receiver.
The VSpeak ECU converter is available for the following remote control systems:
- Jeti Duplex EX
- Multiplex MLink (MSB)
- Graupner HoTT
- Futaba
- FrSky S.Port
- JR PROPO
- PowerBox core P²-Bus
- Spektrum (X-Bus)
The respective remote control system (except Spektrum) can be set using the programming adapter and the HORNET TERMINAL. Individual parameters can also be set:
The VSpeak ECU Converter is updatable.
Detailed information about VSpeak ECU Converter HORNET can be found in the detailed manual.
With the VSpeak ECU Converter for Jeti Duplex and Graupner HoTT not only the data of the terminals can be displayed. With the help of the radio keys all inputs are possible. The handling is similar to the terminal of the ECU (see YouTube video).
-
-
Forum (DE): Jeti EX Konverter für Hornet ECU
-
Forum (DE): Hornet ECU Sensor Konverter jetzt auch für HOTT, Spectrum und M-Link
-
Jeti Duplex EX
PowerBox core
Graupner HoTT
more demo videos for Graupner HoTT:
-
MC20 with Vario display
programming adapter
Multiplex MLink
Multiplex MLink
Futaba (single sensors)
more demo videos for Futaba S.BUS2:
-
T18MZ (JetCatV10) FASSTest
-
FX32 FASSTest
-
FASST + Telemetry Box (robbe Box)
-
T-FHSS (using the example T10J)
FrSKY Horus
FrSky Taranis
JR PROPO
Spektrum XBus
VSPEAK MODELL ECU CONVERTER / TELEMETRY for HORNET/BF Turbines/JetItaliaes/JetItalia
ProJET HORNET ECU controls turbines from behotec, Frankturbine, BF-Turbines, JetItalia, Hammer Engines .
The data that is displayed in the status displays of the TERMINAL can be transmitted by the ECU Converter over the telemetry channel to the radio.
With the VSpeak ECU Converter data from HORNET III and the earlier HORNET II can be transmitted.
The telemetry and ECU connector of the VSpeak ECU Converter are electrically isolated, to avoid repercussions of the turbine control to the receiver.
The VSpeak ECU converter is available for the following remote control systems:
- Jeti Duplex EX
- Multiplex MLink (MSB)
- Graupner HoTT
- Futaba
- FrSky S.Port
- JR PROPO
- PowerBox core P²-Bus
- Spektrum (X-Bus)
The respective remote control system (except Spektrum) can be set using the programming adapter and the HORNET TERMINAL. Individual parameters can also be set:
The VSpeak ECU Converter is updatable.
Detailed information about VSpeak ECU Converter HORNET can be found in the detailed manual.
With the VSpeak ECU Converter for Jeti Duplex and Graupner HoTT not only the data of the terminals can be displayed. With the help of the radio keys all inputs are possible. The handling is similar to the terminal of the ECU (see YouTube video).
-
-
Forum (DE): Jeti EX Konverter für Hornet ECU
-
Forum (DE): Hornet ECU Sensor Konverter jetzt auch für HOTT, Spectrum und M-Link
-
Jeti Duplex EX
PowerBox core
Graupner HoTT
more demo videos for Graupner HoTT:
-
MC20 with Vario display
programming adapter
Multiplex MLink
Multiplex MLink
Futaba (single sensors)
more demo videos for Futaba S.BUS2:
-
T18MZ (JetCatV10) FASSTest
-
FX32 FASSTest
-
FASST + Telemetry Box (robbe Box)
-
T-FHSS (using the example T10J)
FrSKY Horus
FrSky Taranis
JR PROPO
Spektrum XBus
Original: $125.00
-70%$125.00
$37.50Description
VSPEAK MODELL ECU CONVERTER / TELEMETRY for HORNET/BF Turbines/JetItaliaes/JetItalia
ProJET HORNET ECU controls turbines from behotec, Frankturbine, BF-Turbines, JetItalia, Hammer Engines .
The data that is displayed in the status displays of the TERMINAL can be transmitted by the ECU Converter over the telemetry channel to the radio.
With the VSpeak ECU Converter data from HORNET III and the earlier HORNET II can be transmitted.
The telemetry and ECU connector of the VSpeak ECU Converter are electrically isolated, to avoid repercussions of the turbine control to the receiver.
The VSpeak ECU converter is available for the following remote control systems:
- Jeti Duplex EX
- Multiplex MLink (MSB)
- Graupner HoTT
- Futaba
- FrSky S.Port
- JR PROPO
- PowerBox core P²-Bus
- Spektrum (X-Bus)
The respective remote control system (except Spektrum) can be set using the programming adapter and the HORNET TERMINAL. Individual parameters can also be set:
The VSpeak ECU Converter is updatable.
Detailed information about VSpeak ECU Converter HORNET can be found in the detailed manual.
With the VSpeak ECU Converter for Jeti Duplex and Graupner HoTT not only the data of the terminals can be displayed. With the help of the radio keys all inputs are possible. The handling is similar to the terminal of the ECU (see YouTube video).
-
-
Forum (DE): Jeti EX Konverter für Hornet ECU
-
Forum (DE): Hornet ECU Sensor Konverter jetzt auch für HOTT, Spectrum und M-Link
-
Jeti Duplex EX
PowerBox core
Graupner HoTT
more demo videos for Graupner HoTT:
-
MC20 with Vario display
programming adapter
Multiplex MLink
Multiplex MLink
Futaba (single sensors)
more demo videos for Futaba S.BUS2:
-
T18MZ (JetCatV10) FASSTest
-
FX32 FASSTest
-
FASST + Telemetry Box (robbe Box)
-
T-FHSS (using the example T10J)
FrSKY Horus
FrSky Taranis
JR PROPO
Spektrum XBus
